Feeling generous and want to support my design work? Visit my Myminifactory page and leave a tip, It would be greatly appreciated. https://www.myminifactory.com/users/EthanNewhouseThese items are ear plugs with raised design on top. Washington is a 00ga plug and the Seattle skyline is a 5/8in plug. These are scaleable to be any size. Print at a very low speed to keep from smudging, I printed a set of these at 20mm/s max speed and they turn out great. PLA, .1mm layer, 200 degree extrude, 50 degree bed. I use a combination of blue painters tape and glue stick with no adhesion issues. Pause the program before it starts the graphic on top, switch out the filament to a desired color, resume print, enjoy.