Replacement legs for Armattan Morphite 180mm and ZMR 250. These are taller legs which are ideal for carrying a battery under the frame. Both designs fit the Armattan Morphite frame. NOTE: The design goal was to create legs that anyone could print consistently. Don't forget you need to run a tap through the screw hole. See the "Instructions" tab for the details. UPDATE -09-11-15: Based on testing revised versions of the Thicker design uploaded. I've also include the 123D CAD files in case you want to customize the leg height further. The hole is designed to accommodate a M3 12-16mm screw. UPDATE -09-11-15: Recommended infill = 80% or greater The design goal was to create a part that anyone could print consistently. The screw hole need to be tapped using M3 x 0.5. It takes 5 min and guarantees a perfect fit.