For Whirlpool Models Part was printed using PLA matrial on a heated bed with modified CURA settings, see below. The part is functional, and currently in service. Layer Height: 0.1 Shell Thickness: 2 B/T Thickness: 2 Fill Density: 20% Print Speed: 30 Print Temp: 215c (PLA) Bed temp: 60c Support Info: Type: Everywhere Type: Grid Angle: 60 Fill: 30% Brim: Yes Edit: Printing the part horizontally will allow the part's 'Spring' to be printed accurately. Approximately 1.5Hours for finished product,Remove Damaged part, Print door strike, Install