A model based on Perry the Platypus from the Disney's Phineas & Ferb series.I scaled the model down to approximately 98mm x 36mm x 24mm (LWH) when assembled. Also added 5mm x 6.5mm pegs to the legs, with a corresponding 5.2mm hole in the body section. If you know how to widen the holes, I recommend you widen them to about 5.5mm so that you won't need to drill it out.I used 10% fill, 0.27mm layer height, HBP temp 120C, nozzle temp 220C, 1 shell.If you will be printing this entire model in one color, just print PTP_All_Parts_v1.stl.Otherwise if you have a dual-extruding Replicator, download the Perry The Platypus v1 - STL Parts for Dual Extrusion Merging.zip file.For the body, tail, legs and beak section, merge the two STL files named PTP_Appendages.stl and PTP_Body_Section.stl and print.Then to make the two colored eyes, merge together PTP_Eye_Scleras.stl and PTP_Eye_Pupils.stl and print.To attach the beak, tail and eyes use some glue, instant or otherwise.This is my first project and the fit for the legs wasn't perfect, so I had to carve out a little bit of the body to insert the pegs.