Mount a longboard or skateboard on your wall horizontally with the graphics facing outward. The board is easily removed by pivoting the top hook and sliding the board up and out. Print three identical hooks. Two will be used to hold the board from the bottom and the third will be able to pivot, locking in or releasing the board from the top. At the least, the two bottom hooks should be screwed into studs, or should use the proper drywall mounts, toggles, etc. to support the weight of the board. The top hook should be screwed into the wall more loosely, optionally with a washer between it and the wall so that it can rotate to insert and release the board.