Made a tool that should (hopefully) clip onto my Rigidbot and hold my tools. Slots on this are: calipers hex wrenches/allan wrenches Scissors or USB Stick (should fit both) small putty knife or feeler gauge sticks (should fit either) small bottle of Lubricant and lastly, either a spatula holder or toothbrush holder. Im going to use it to hold my cricut spatula. the Inner measurements of the square are at 20mm, which should be just a bit large for the Rigidbot. Notes from my first print: the 'USB' slot is a bit too small to fit a USB Stick in to. will widen and re-upload. similarly, the inner Round hole to hold Lube is too small for my lube. it fits a Sharpee quite nicely though. the round holes work quite well for Allan Keys. Caliper fits nicely. Added a V2 file -- wider hole for feeler gauge, wider hole for Lube.print it attach it use it