A mount which allows me to mount my radio onto my paraglider. It uses the radios beltclip to attach to a 25mm tube. Both straight and 45 deg mounts are here as stl. Both have channels embedded into the mount for zip-ties. Added April 2015 - radio-mount-bfeng.stl radio-mount-bfeng.stl has hole for a DIN-6 socket. DIN-8 should also work. There are holes for flower nuts for the DIN mounting screws. These are the smaller M3 flower nuts - about 4mm across. The larger ones aren't goint to work. Getting the nuts into place so they can be pulled home using M3 screws is challenging. I used curved forceps to hold them. A cable tie on the cable will stop the cable being pulled enough to damage the DIN wiring.