This Flute functions much like a recorder. It should be able to achieve the following notes cbagfed There are resonating issues with this flute and I am still working out how to solve them. Simply it does not achieve its full pitch nor does it achieve the tone it should. This flute is based on my favourite wooden flute.Files; flute v3 - beta- plate; All files in one file. The following 3 files make up the v3 beta flute. As the naming of one of the parts there is a v4 in the works. flute - test printv3.top.stl flute - test printv1.bottom.stl flute - test printv4.insert.cura.stl Additional equipment needed to achieve a functioning flute is a small file and E-Tape. It does not need to be E-Tape but it is what I have been using. The small part is the insert able Reed as I am calling it, due to lack of a better name. It's function is to push air up towards the square cut hole to achieve proper pitch and air flow across the keys. The notch has to face this square cut whole. The file is to be used to tune this notch so that correct air flow is achieved. The tape is used when the reed is inserted into the top, to create an air tight seal.