Printable groovemount plate for Johann's PG35L micro-extruder. My wooden groovemount was "in use", and I wanted to be able to try out Johann's design.Rather than modify his extruder, I simply made a groovemount plate with integrated standoffs.Print, insert hot-end, and enjoy! You'll want to print this in ABS, particulararly if you are using a j-head.This will only work with Johann's PG35L remix, as the extruder is offset in the body.EDITED : I managed to upload the wrong version! The old verson had the j-head mount properly offset, but the mounting holes where 2mm off. Thanks to New Perfection who noticed this!!