This is for a mod i'm planning of a server case i had lying around. The rack should fit in a space that was reserved for a fan. You'll need a Dremel and maybe a grinder to fit that into that particular case. But hey, it was wasted space before so... :) Oh, i did not have the opportunity to print this yet so i dont know how it will turn out or if it will even fit. Good Luck! :) EDIT: I had to remake the model when i tried to print it because it wouldn't convert to stl well enough. So i remade the model using openscad. i tried printing it without support and it failed. i think i should add 2 support beam, i'm a bit scared this thing will break before i'm finished installing it. And just so you know, i didn't went as far as trying to see if the opening is the correct size or if the holes are at the right place. I mean from the spec they should be... WARNING: You can't use this on the sc5299dp without heavily cutting the case, and i decided in the end that i wouldn't do that... This part is here for those who want to try anyway knowing i didn't even verify if it fits. Good Luck