
Hocus Pocus! You present your audience with six colored blocks, each one with a hole through its face. Your audience inspects the blocks as well as the box you will place them in and the pin you will pierce them with. A volunteer selects two of the six blocks. After placing all six blocks into the box, you pierce the box and all the blocks with a pin. Waving your hand over the box, you say a magic word. Turning the box upside down, the lid falls off and out drops the two chosen blocks! But wait the pin is still running through the box with the remaining blocks still pinned in place!See the demo video http://youtu.be/pmZhGH7pSUoPrint this magic trick along with Thing 24719,http://www.thingiverse.com/thing:24719and put on an impromptu magic show! You'll be sure to amaze your friends and family.Print either the "small" or "large" version of the trick. I recommend using the small version as the smaller blocks are less likely to tip over as you load them into the box. While there's nothing wrong with them tipping over, it is annoying and makes it look like you are fumbling or doing something tricky. On the other hand, if you want such an effect -- then use the large version! The large version uses six 20x20mm blocks while the small version uses six 20x14mm blocks. Not surprisingly, it will take you less time to print the smaller version.Small VersionLarge VersionPerforming the Trick To perform the trick,
- 0 inches x 0 inches x 0 inches
- this product is 3D printed
- 16 available colors
- material is a strong plastic
- free delivery by May 05
- 0 parts
