A customizable spool holder designed to fit the mounts of Eventorbot. User can adjust diameter and length of the spool holder, along with an optional offset (as "spool diameter") which will change the bracket to mount the holder lower on the Eventorbot. For the most part the "spool diameter" variable is not intended to be changed however. Note that differences in the spool hole diameter will result in a change in the bracket size, so different diameters will not be interchangeable with each other. Edit 1/15/2014: The Rev 2 .stl files have a larger screw hole size to support #8 screws. Only the bracket mount was affected.I modified the openSCAD file of the "Customizable Replicator Spool Holder with Filament Guide." I removed the filament guide as it didn't make sense with the Bowden-driven Eventorbot. But if necessary, cranking the "spool diameter" variable up, and printing the filament guide from the "Customizable Replicator Spool Holder with FIlament Guide" should work fine.