I redesigned this in scad with a 15mm spacer instead of the 1/2 used on the original. My MK7 came with 5/8" mm spacers. Fits a Sharpie Fine Point just like to original thing.I may add a "tab" to it that sits on the side of the heatsink to keep it in a more stable position.Print - (I printed with 30% infill and 1 shell - 2 shells might be optimal). Mount in the left or right fan spacer position (I put an o-ring in to prevent slippage to fill in the 0.875 mm gap) Install Sharpie fine point marker PlotIf you don't want to use an O-ring change the spacer height to 15.875 in the OpenScad file.