The ultimate collection of drawer dividers for both small and large drawers. Specifically modeled for Akro-Mils drawer but will fit most other drawers (or can be made modified to fit any drawer) Confirmed to Fit Akro-Mils 10716, 10726, 10744, 10764, 10116, 10126, 10144, 10164 cabinet drawers. It is strongly recommended that you print with a layer height of 0.27mm and that you print the drawers with supports and then cut the supports off once the print has completed (they are very easy to remove). I've included a 3ds Max file that contains all drawer divider types for easy modification (history stacks included). I've also included zip folders that contain the following: It is strongly recommended that you print with a layer height of 0.27mm and that you print the drawers with supports and then cut the supports off once the print has completed (they are very easy to remove). Infill: 20% seems to work fine for me but I do have a fan attached to my extruder that cools the plastic as it comes out. So you may just have to determine that based on what percentage in-fill works best for your printer. On mine, I just used 1 layer (wall thickness) - got better results. I printed all of mine in PLA and it worked perfectly. I'm sure it would work perfectly in ABS as well if that's what you normally print in.