We had a for-fun poker tournament with our friends on Valentine's Day, and I wanted to make a trophy! I have uploaded a heart shape that has no engraving, so you can use any 3D software to create a text engraving (2mm deep usually works great). I am uploading this nearly 2 years after making it. Back then, I was new to 3D printing, hence the slightly messy text engraving in the picture.The STLs are already oriented for you. THREE OPTIONS for printing: OPTION 1: First print the base STL, then without removing it from your build plate, print the Heart. You can change the color of your plastic so the base is one color and the heart is another (this is what I did, although I recall having to use a glue gun or super glue to glue the two pieces together anyway because it may have broken off) OPTION 2: Use dual extrusion to print the base as one color and the heart as one color in a single shot. OPTION 3: Print the base separately. Then move the heart STL to the build platform and print it separately. Then glue them together! Any print resolution you choose should be fine.