Passenger carriage , Train Gauge 1 scale 1:32 These parts together with the bogie, allows one to get a nice carriage to your garden railroad. To manufacture a carriage requires, besides the printed parts. Plywood or similar materials and thicker paper, and glue. The picture shows a test carriage, built with 5mm foamboard. All printed parts have i glued with a glue gun. I also have chairs, if you want them in the passenger car. The gates can be opened. bogie to the carriage, go to http://www.thingiverse.com/thing:160987 buffers to the carriage, go to http://www.thingiverse.com/thing:165297 basic building guidance on my website http://utj.se/ny_sida_55%203D%20printing%20Personvagngrindar.htmIn my case, I will use 3mm plywood, to the bottom plate. dimensions 530mm L x 84mm B The walls are made of cardboard, which I glue thin wooden slats on. As picture shows. Buffer plank, reinforce the underside of the bottom, with a piece of wood about 6 x6mm. To obtain a larger surface to glue on. as shown on the photograph. And a piece of wood to the boogie. as shown on a picture. for better movement of Boogie. (just one piece, here I have tried myself to find a solution) The small hinges to the gates, shall be mounted on the gable, can be glued with acetone. The windows have a groove where you can insert a piece of clear film. in my case clear transparencies, or packaging of a clear plastic. The shaft for the brake handle, I used a slim skewer. The roof I do with paper that I glue on to sawn pieces of wood, similar to the gable in shape.