An acrylic and neoprene case for Makey Makey. Lasercut or 3d printed. Designed to be picked up and held. Open source. CC-BY-SA.You will need the following purchased parts: 5 each: M3 x 16 mm Screws M3 Nuts M3 Lock nuts O rings (optional or print with NinjaFlex) Print or laser cut your front plate and back plate. Print (ninjaflex) or cut (neoprene) your gaskets. Print (ninjaflex) or purchase O-rings. Add O-Rings to Makey Makey. Assemble front plate, gaskets, Makey Makey, and back plate. Use the M3 screws as intended and tighten nuts. Enjoy.