Printable storage/organization cubes. Can be used for multiple functions including: hobby, craft, and art supplies. Not to mention jewelry materials or electronics components. There are multiple configurations for download. Each configuration utilizes at least one of the three drawer sizes provided for a perfect fit inside of the cubes. Storage Cube 5 has a length of 242.5 mm which is about 9.5 inches. This cube will fit nicely within the Replicator 2s build volume. For added organization opportunities look to my chain spool (http://www.thingiverse.com/thing:195877) files. These fit perfectly within the drawers for chain, wire, thread, etc storage. Optimum infill: 0% for the drawers. 5% for the cubes. Optimum Shells: 2 Optimum layer height: .25 mm Depending on the amount of curling you encounter, you may need to sand or file down some of the corners to allow for more smooth drawer movement. Cube 1 is the original configuration including 3 small, 2 medium, and 1 large drawers. Cube 2 includes 9 small drawers. Cube 3 includes 6 medium drawers. Cube 4 includes 3 large drawers. Cube 5 is not quite a cube and has the maximum amount of storage with separate locations. It includes 9 small drawers, 4 medium drawers, and 2 large drawers