This is Release 1 for a case for the BADGEr_v4.1 which is an eInk Badge you can get from Seeedstudio at http://www.seeedstudio.com/depot/badgerv4-p-1587.html When it's complete it will be held together by 1/4" x 1/16" magnets. I've already started thinking about Revision 2 of this case. It doesn't have any lateral shear resistance since it's being held together with only magnets. Adding a latch on one corner would give it strength but still allow fast/easy removal. I want to shorten the depth of the back and front. On the front, particularly, I want the display on the same level as the front plate. badger_case.scad is the OpenSCAD model. badger_case.stl are both the top and bottom pieces in one file. badger_case_bottom.stl is the bottom of the case badger_case_top.stl is the top of the case. This is a Work In Progress! Code is in github at https://github.com/melodybliss/3d/tree/master/BADGEr Latest change: after first real test print, realized forgot opening for the header. Also shifted the mounting holes over by 1.5mm and shifted the power switch opening by a couple of mm Next change: magnet isn't going into it's slot well, so increased the size of the magnet's hole slightly and parameterized the border for the magnet.