This is a full print for a single color. The sizes are roughly based off of the spare parts from Erik's upload: http://www.thingiverse.com/thing:770These print out great at .1-.15 layer thickness. I used .1mm with a feedrate/Travel feedrate of 30/45, and 66% fill. The print took me about an hour for one city, 30 min for a settlement, and 15 min for a road. I would guess at the settings I showed around 9 or so hours of print time.For those who care. Roads are 25x5.5x5.5mm Cities are 22.5x11.5x15mm roof is 90deg and side of roof is 5mm tall and 11.5mm long Settlements are 10.25x14.5x8.5 the sides of the roof are 8mm and come out to just under 80deg angle.Link to my solid works file(2010 Premium): http://www.randomike.com/download/settlers1person.SLDPRT