This is an adaptation of my Ghettostation Antenna Tracker design to fit the ImmersionRC EzTracker (currently version 1). The case features: In case you already have the Ghettostation Tracker printed, the only items to be changed are: Please note: The mounting plate for DUO5800 V4 is based on measurements received from ImmersionRC only. It has not yet been tested (I only have a V3). Please post here in case you have issues with the V4. Do also let us know in case it works perfectly as advertised :-). You will need to print 2 of the Duo5800_push.stl and Duo5800_lever.stl for the V4 of the DUO5800 as it has both Band and Frequency selection buttons. 27/1/2015: 29/1/2015: 16/2/2015: After receiving feedback that a large part of the files failed to print in Slic3r and Cura, I believe I found an error in the scaling method I used to export the files. All files are updated and check out in 3 slicers I have tested so far. Please report back in case there are still issues. Other changes: 01/03/2015: 29/03/2015: 11/04/2015: You will need to replace the tilt head plate with the new lock plate (Head_Lock.stl). 30/07/2015: added a quick 4 part version of the case to print on smaller printers. Part 1 needs to be glued to part 2 and part 3 needs to be glued to part 4 along the split line. Please report back in case you face issues. Print with 30% infill except for the pin which should be printed with 100% infill for added strength. Some parts need supports: Shopping list: === Main Tracker: 1x 5V BEC (http://hobbyking.com/hobbyking/store/__10312__Turnigy_5A_8_26v_SBEC_for_Lipo.html) 1x Standard Analogue Servo (I used a Hitec HS-325HB) for the tilt head 1x GWS Digital Servo Sail Winch S125 1T 2BB 360-degree (http://www.goodluckbuy.com/gws-digital-servo-sail-winch-s125-1t-2bb-360-degree-7-6kg-106oz-in-1-28sec.html - I tried the HK analogue type as well but it does not work very well) 1x Ball Bearing 8x22x7mm (http://shop.rotor.com.sg/show-detail.asp?prodid={0CF678C9-B488-4739-9638-BA12492E7EF7}&pn=1) 8x Ball Bearing 3x10x4mm (2x http://hobbyking.com/hobbyking/store/__11726__HK600GT_Ball_Bearings_Pack_3x10x4mm_4pcs_bag.html) 4x Video Composite connectors 1x 6Pin DIN cable to connect the DUO receiver to the EzTracker (Audio) and Video out 1x Deans/T-Style female power connector 1x Main Power Switch (see case front left side for dimensions) 3x 43mm Nylon or metal spacers with M3 inside thread Video RX: For the VideoRX Part I used (others will work as well but require a different mount on the Tracking Plate): Optional: