This is a gopro3/ccd cam holder similar to the one I use for my quadcopter with some features added to suit the Zephyr. As of right now I dont have a way to strap in the cams besides placing a piece of scotch tape over the gopro and removing it after flight. The ccd cam fits tight enough on its own. I will most likely modify this in the future though with a strapping method. This is the ccd cam I use http://www.readymaderc.com/store/index.php?main_page=product_info&cPath=11_62_12&products_id=582 This is a sample video I recorded after a couple of test flights. It was very windy this day so not completely smooth http://www.youtube.com/watch?v=qExTtgUdw_g&feature=youtu.beCarve out a rectangular slot to place the cam holder. Also carve out 3 slots that will accommodate the rear notches of the cam holder. Make sure the bottom of the cam holder is aligned with the bottom of the zephyr and glue it. (I used gorilla glue) Also make sure you have a hole where the fpv cable can reach the ccd cam before gluing.