A turnout switch for Märklin C-rail which fits every turnout! It was never been so easy to install a servo under a Märklin C-rail turnout.Print every part first. Take a thumbtack as pin between the servo arm and the part ArmWissel.stl (see 3rd picture). Use M2 bolts to mount the servo on the part Bovendeel.stl and Ondergedeelte.stl Finish the part Ondergedeelte.stl by adding the part Kap.stl which enclosure the part ArmWissel.stl Mount the turnout switch with the original Märklin bolts (M2,2 x 5,0) into the C-rail turnout