Derivative of thing 7064, Thermocouple sensor, single sided carrier board by moleofproduction ( http://www.thingiverse.com/thing:7064 ). The Mole of Production asked for a "proper Eagle version if anyone wants to put in the time," so here is one version.The board is a single-sided design (as MoP's original), but has added holes for mounting with stand-offs (footprints from the Sparkfun EAGLE library.) The connector footprints are 1" (2.54mm) which should accommodate either the 4-pin mini-terminal-blocks as in the original design, or inexpensive pin headers or female sockets, but these are as of yet untested.Updates for V1.01: As per ednisley's suggestion, a solder jumper has been added between T- and GND to enable open thermocouple detection.A large ground plane has been added to improve the temperature measurement accuracy as per the MAX6675 datasheet.Knowing some may wish to etch their own boards at home, and having experience with the laser toner transfer etching method myself, line widths and clearances of the artwork have been increased.If you don't wish to make it yourself, you can also get boards from BatchPCB: http://batchpcb.com/index.php/Products/56827