Here's a 3D printable Arduino/Gshield Enclosure for Inventables X-Carve. I thickened the walls, added some ribs, and made the arduino mountable via countersunk #4-40 screws (can probably use M3's as well). I also loosen the tolerances so everything should fit right off the printer. Enjoy. Printed with a .8mm nozzle at .6mm layer height at about 18mm/s in ABS. Took about 1hr 45min. The CAD files attached are in 2015 SolidWorks (and STEP). Designed with a mixture of bottom-up and top-down using these references: https://grabcad.com/library/inventables-gshield-enclosure-1 https://grabcad.com/library/gshield-for-arduino-uno-grbl-shield-1 https://grabcad.com/library/arduino-uno-simple https://workbench.grabcad.com/workbench/projects/gcl5zpCuwqCXWLvYktLQBc-2IHvossNo37ycTOkzg6gREW#/space/gcvs_XeRNVzNkfG_tFTAMd0C2lBbCsLcagOxXb1Jlki0kT/link/153597