If you build one, Please Post it! This is a simple mount for the FT952 200mw video Tx. this will allow you to easily add it to the Emax NightHawk frame. I printed it without support on a MakerBot Replicator 2 at 100 micron layer height with no support. clearances are pretty tight so that the VTx will stay secure. Happy printing! You will need 2 x M3 bolts and 2 x M3 locking nuts to attach this to your quad. I also used 2 M3 washers on the under side to make the connection better with the locking nuts. I used 1 small Ziptie to secure the module to the holder. if the fit is too loose, you can add some double sided mounting tape under the module to take up space. Solid! Enjoy!