A very simple case (open) holding a Banana Pi board and a standard 2.5" HDD. See instructions for a list of parts to print and needed screws. In the pictures you see my print where side parts are made with green glow-in-the-dark PLA. Looks nice at night.This case is very simple and easy to 3D print. You'll need to print the following parts: How often you'll need which part 2 times bananapi_hdd_part.stl 3 times bananapi_pi_holder_1.stl 1 time bananapi_pi_holder_2.stl All parts are designed to be printed easily without support material. The STL files already contain the parts in the best orientation for printing. Additional required parts 4 HDD screws 4 M3 x 16mm screws 4 M3 nuts 4 2.2 x 6.5 mm screws Instructions That's it. This case is useful for situations where you want to use your Banana Pi with HDD but don't have a place where to put them. And it's not nice to place them somewhere on the ground.