A printable corkscrew with a classic look.It is currently untested so I am very curious to find out if it can work. There is no question that it will break eventually :)Download the Corkscrew1.STL file and print it.Optional - Printing strategy: If you have a filament deposit printer like me (Ultimaker) this tall and slender print will rely on you having correct layer cooling time and temperature settings. I used a 5 second layer cooling time for 1.2 mm wall thickness at 0.2 mm layer thickness. When the printer reached the shaft I dropped the print temp 20 C manually. I am not so sure that a higher layer cooling time will be beneficial but dropping the layer thickness to 0.1 mm would probably give a better result, it would however probably double the time required to print the corkscrew.Please comment if you try it, we want to know the results!