Why pay $50 for a fender eliminator kit when you can print one yourself! This design is a 2 part'er, held together by acetone and (2) #8 screws. my acetone joint was very strong, and I am not sure the screws were necessary. The design could use a few tweaks, so feel free to make changes!Printed ABS at 0.3mm layer, 25% infill, 4 perimeters. Glue part 2 to part 1 with acetone. I used a plate with a bit of acetone so that I could "soak" part 2 in order to make a really really strong joint