With a 3D printer, making a Gundam Stand with variable angle is easy. However, seems that it is not available in Thingiverse. . This one is designed so that the length of stand and the angle of stand can be adjusted easily. Moreover, I tried to minimize the number of screw required. Only two piece of M3, 1cm screw is required: More different kinds of Top module for different kinds of Gundam model is going to be designed and uploaded. . Updated at 18-Nov-2014: Uploaded an add-on part for RealGrade Gundams http://www.thingiverse.com/thing:551180 Updated at 03-Nov-2014: Uploaded "Parallelgram_Base" part. With a trade-off of larger size, it is able to support a really low angle without falling over, and better for Action posture. Updated at 02-Nov-2014: Uploaded V4.1 "ARM" part, added a stopper structure for stopping the "Holder" part from sliding downward. Updated at 29-Oct-2014: . Print with PLA, with 0.1mm layer height Use 100% infill for the Holder Part, 20% infill for others . Please aware that holes on "Extender" and "Stand" parts are all 2.5mm. This is designed so that you can use a screw trap or tapping screw for holding parts together. . Parts that cannot be 3d Printed include: . Recommend to have the following tools: