Alula inspired free flight glider. 1/5th scale. Glides well.PLA 2 shells .2mm layer height standard PLA setting Simplify 3D: 100% infill to get nose weight Snap together, leading edge first then bend the trailing edge to slide in to tail. After assembly you may need to put some reflex in the elevons. IE lift the trailing edge of both wings a bit. Also adjust either the left or right elevon to fix roll issues. IE left trailing edge up if it rolls right and right trailing edge up if it rolls left. Update: Added wing v4 and tail V4 which moves the center of gravity more forward and is easier to adjust post printing. Glides more stable. Added launch point to fuse for use with rubberband. Also print both parts, wing and pod at 100% infill. If you feel the glider is nose heavy, print with less than 100% infill