Now with lids! One has an opening for wires. Lids have been updated! The posts have been elongated, so they hold the LCD in place. My print fits the display, but my printer/software seems to have issues again with scaling the objects to the correct size... Made for "QC2004A" LCD module. To do: Update hole size on lids. Currently you have to drill them out to 3mm.Print the frame and the lid of your choice. Insert display and fix to frame with four M3x8 screws when not using a lid. Drill out the holes in the lid to around 3mm. Guide wires through the hole (if applicable). Use four M3x16 pan head screws to close the frame. I've printed mine with an infill of 20%, bottom/top thickness of 0.3mm for translucency effects, and a wall thickness of 1mm.