This simple 16 step encoder can be built from radioshack parts. http://www.radioshack.com/product/index.jsp?productId=2049723It might be possible to get more steps from the encoder using something like http://www.thingiverse.com/thing:1527 .Modified this circuit to fit the radio shack parts: http://www.pyroelectro.com/tutorials/simple_motor_encoder/theory.html If you skip ahead a few pages it tells you one way to implement it on a microcontroller too.Print the disk raftless, then color in the dull bits with a sharpie. The reflective plastic from the smooth raftless surface will give you a good signal.Need 1 M3x16mm screw to assemble.