When I made a copy of the neat game Cyvasse by dutchmogul over at http://www.thingiverse.com/thing:92172, I thought it could really use a proper box to go into. So naturally I decided to print one! This box features shaped slots for the large pieces to fit into, separate bins for the white and black small pieces, and is properly sized to snugly fit the board and wall sections. The lid slides into place and has the game's name debossed into the surface. Play on!While the top portion of the lid nominally has a width of 137.3 mm, when printed mine shrank down to 136.8 mm. This lead to a slightly looser fit than originally designed, though it still works perfectly fine. If you want a tighter fit however, I recommend scaling up the lid in the horizontal dimensions just ever so slightly. I have left the models as is however, in case people want to print in materials with less shrinkage. Printed in PLA/PHA, 0.2 mm layer height, 230 C, 50 mm/s, 25% infill.