Meant to be paired with:- http://www.thingiverse.com/thing:327311 http://www.thingiverse.com/thing:302435 1x 40mm fan blows at the Budaschnozzle hot end 1x 40mm fan blows at the print 1x capacitive probe for auto bed levelling I ended up not using the fan blowing at the print. The combination of the two fans was too strong and prevented the hotend from reaching 200C.Built with 40% infill, 3mm ABS/0.5mm nozzle @225C hotend/120C bed, 4 shells, 0.25mm layer height.