This Easter, print Ducky the Lop Eared Bunny. Modeled with ZBrush, he's as cute as he is plastic. Printed on a Type A Machines 2014 Series 1 3D Printer Printed with Cyan PLA from Jet Printed with support, 70 degree overhang angle Printed with a brim, 20 lines 200 microns (0.2 mm layer height) 100% Scale 175 mm Height 20h 26m Print Time 0.8 mm Shell Thickness 6% Fill Density 90 mm/s Print Speed 0.3 mm Z hop when retracting 92 m of filament used 4 mm cut off object bottom 230C Print Temperature Sliced with Cura Modeled with ZBrush Support and bottom cut off are a must when printing this model.