F-22 Fighter Jet with a Sliced rear so that it can be printed vertically and then mounted to a flat surface. Planning to do a few of these at different angles to create a 3D Airshow on my wall. I used velcro on the back so i could rearrange it if desired. This was derived from this F-22 model: http://www.thingiverse.com/thing:63453 by IIIWhiteBoyIIIInfill: 10% Shells: 3 Layer Height: .15 Dimensions: 149mm x 145mm x 45mm (~5.75" x 5.5" x 1.5") Build Time: 4hrs 42min