Foldable transmitter post for RCExplorer Tricopter V3 with 10mm carbon fiber booms (or any 10mm booms). Suitable for TS5823 V2 VTX style transmitters. Allows you to fold down the transmitter during transport, and fold it up i 2 seconds. Make sure it clears the back propeller! :-) Bonus material are two antenna holders for the Rx antennae :-) (boom and 3mm plastic pole) Get the RCExplorer Tricopter V3 frame at http://www.rcexplorer.sePrint the parts standing on the print bed as they would be mounted, with support. Cut a 3mm thread into the enclosure and left side of the base. Mount the transmitter into the enclosure with a small zip tie. Fasten the enclosure to the base with a M3x16 hex screw. Mount the base to the boom with a small zip tie. Make sure it clears the propeller with room to spare. Pressure fit the Rx antenna top to the top mount and pressure fit it to a 3mm plastic rod. Mount the other Rx antenna mount to the boom using two small zip ties. Pressure fit the other Rx antenna into the mount.