NOTES PLEASE SEE LATER VERSIONS OF THIS. IT DOES WORK BUT I HAVE REVISED THE DESIGN UP , FOR THE BETTER. Hague MMC mini motion cam GoPro adapter. this steady cam doesnt work very well with the GoPro or similar lightweight cameras, so i made this test piece to see if adding extra dead weight to the camera would work any better and it did. this was just a test and it really needs even more dead weight adding, i added 200g of weight to the box. (weight is made up from two curtain blind hanger weights) it uses the standard 1/4 whitworth nut to attach to the hague MMC, then i just glued the dead weights in the box, which doubled up to hold the nut in place. like i say this was a quick test to see if the concept worked and it does a great job , even in this basic design concept. i intend to make a much better design of this at a later date but for now, this may help someone or inspire someone.NO SPECIAL INSTRUCTIONS, SELF EXPLANATORY 0.2 layer height, all standard settings, made from PLA INFILL WAS CIRCA %30 AND WAS FINE FOR THIS.