Mount for 36x36mm KK-mini flight controller (30.5x30.5mm hole spacing) and similar form factor boards such as the Flip32 and Flip32+. Has markings for center of gravity and mount point alignment for screws found on the RCExplorer Tricopter V3 (can be ordered from http://www.RCExplorer.se) Mount with anti vibration tape on frame aligning markings with top row of bolts for the tail boom, to allow for perfect CG point on the frame.Print at 0.1 layer height, solid. Thread 2.5 mm holes to 3mm thread using a thread tapping tool. Mount on frame with anti vibration tape with notch facing forward and alignment aid aligning with first row of tail boom bolts. Attach KK-mini board with four M3x6 hex bolts for easy moving between tricopter frames.