Just as the title says; A mounting bracket for 50x10mm led strips. The ledstrips I used are "Cool white 5050 SMD led strip" from eBay, make sure you get the one that you can cut in lengths of 50mm, there are a few that you can only cut in lengths of 100mm.I printed this at 0.2mm Layer height with 25% infill. You could try printing at a lower layer height so that the chamfer looks nicer and the strip will stick better. Connecting the led strips; Solder the strips in parallel and connect it to your 12V power supply, make sure the polarity of the strips is correct!