The Makerbot 3D Scanner kit is a MOUNT made fit for a pico projector, webcam, and an (optional) iphone/ipod.for more details on the 3D Scanner, and all of the components needed to take three-dimensional scans, please visit the 3D Scanner wiki page:http://wiki.makerbot.com/3d-scannerNOTE: this is only the dxf for the lasercut parts. You still need various nuts & bolts, as well as the external hardware (projector, webcam)For a compete kit with all nuts, bolts, inserts, etc... purchase the 3D Scanner through the Makerbot store: http://store.makerbot.com/Lasercut the attached dxf file using 5mm plywood! (4.5-5.5mm should work)You will need [most of] the following for a full kit:20 x M3 Nuts 18 x M3x16mm Bolts 2 x M3x22mm Bolts 2 x Threaded Tee Insert (1/4-20) 1 x Hex Bolt (1/4-20 x 3/8\") 1 x Washer (1/4\" x .04\") 1 x Machine Screw (1/64 x 1/2\")if you are using the pico 101, you do not need the 1/4-20 x 3/8\" bolt if you are using the pico jr. you do not need the 1/64 x 1/2\" machine screwAssembly Instructions are on the Cyclops wiki pageall parts can be purchased on mcmaster3D SCAN EVERYTHING!