Y axis Belts Holder for Makerfarm I3v . i didn't like how the Y belt is attached to the bed with the "zip ties" method provided in the build instruction manual . i wanted to design a simpler and secure way to align the belt . i found this method improves alignment and holds the belt in place without using zip ties. Also not backlash. For installation you will need : 1) Stock M3 Long screw and lock nut. 2) 4- M3x10 or 12 mm 3) 4 M3 nuts For installation you will need : 1) Stock M3 Long screw and lock nut. 2) 4- M3x10 or 12 mm 3) 4 M3 nuts Suggested print settings: clamp: ABS , 20% or more infill 3 Perimeters Holder ABS , 15% infill . Support for the hollow part and belt channel