m8 of mine needed a Nexus 7 holder in his car. He sells some cool incar cameras so it also neeed to fit above an existing screen (see pics) Wanna c if he can post the crash online before the car comes to a halt. UPDATE: Sorry forgot to add that this is for a Nexus with a case on so it will be deeper than a nexus without a case. The brief was the case (Flip style) must fit in it as well. If you look at the incar pic u can see the case its very thin but the holder has the be wider and longer by about 4mm to handle it. 1 problem I cannot print in 1 as its longer than my print bed and printing flat will get the better finish:( I split the model into components so it would fit on the bed. Metal bracket made up fairly simple design to hold the Nexus. All components stuck together with orig type super glue 4 bottles for a quid down the £1 shop. Then bolted to the existing bracket nice and tight works a treat. Grab it print it abuse it :)