This is a wall mount for a ¼" acrylic artwork made for me. There was no good way to attach the acrylic to the wall, so I decided to create and 3D print a solution. The acrylic sits in the mount which must first be attached to your wall. In my case, it was attached to a brick wall. You must also drill holes in the flat back plate of the piece to attach to your wall. I did not include drill holes in the piece because everybody's wall is different, and they may want to adjust those.The wall mount was made for a specific work of art given to me by a friend. The work of art is on a piece of ¼" acrylic. We had a hard time hanging the work of art, so I created a wall mounted 'seat' for it. You will need to mount the bracket by drilling holes in the flat back plate, and then attach that to your wall. The ¼" acrylic should sit in the wall mount. You may have to attach a piece of 3m double sided tape to the top of your work of art to hold it in place. This was a pretty specific project, so not sure if anybody else out there can use it, would love to see somebody find a need for it!