Again a new derivative for the X-Carriage Quick-Fit, but this time for LM10UU !!!Almost keeping the previous design, I got a 9,3cm this time !!! not so bad for LM10UU.I had to "improved" the Fan Quick-Mounts because keeping the 50mm spacing between rodes causes the fan holder crash in the bearings.To keep the carriage as low profile as I can, I simply made fan mounts thicker, while you can hide nuts inside the fan mount !!!Update June 15th:These instructions are most like the original thing as I kept the concept and the same fixations so :)Both parts print vertically, join them together with 20mm M3 bolts.The Linear bearings slide in with press fit (no tie required, need more test, but for now it works well without)It has a belt adjuster on one side of the belt clampsYou need two x M4 (13mm) 624 bearings for the Quick-Fit Lever.This quick-fit features two "quick-fit" fan mounts :) as it's little brother for LM8UU.