Work in progress. Edit: I've added a Motor Mount bracket, Need to receive the motor to test as I didn't have a template for the screw holes on the Turnigy motors I've ordered. I attempted to designed a lightened frame that also accepts the 10.5mm Carbon Fiber Square Tubing used in the 2.6 revision. I've also countersunk flat head M3 Screw heads (http://www.mcmaster.com/#91294A135) into the top plate and designed the bottom plate to have threads tapped(http://www.mcmaster.com/#8305A12) into it to eliminate the weight of the nuts. I've also integrated pin holes to accept similar camera mount isolation hangers as used in the latest design. (http://rcexplorer.se/wp-content/uploads/2012/09/trihv27-2.jpg) I haven't yet assembled this, so I can't guarantee it works at all.