A case for a RPi A+, B+ or B2 in the shape of an amiga 500. This is based on Falken76's Amiga 500 model http://www.thingiverse.com/thing:67140 but has been stretched so as to fit a pi nicely without having to print an oversized case. I have not yet printed one myself so is a WIP. There will likely need to be support material whichever way it's printed and it may not even fit a real Pi There has been one known successful print of this and the top will require support materiel to be generated. from my slicing, it seems printing it upside-down uses the least support and quickest timeHas not been made yet. There is a thin panel in the disk drive opening which is meant to provide support and be knocked out for passing GPIO cables through.