These are the production files for Shapercube 2.0, the cool, solid like a rock 3D printer from Germany. It is approx 42x41x42cm big and has a print surface of approx. 190x200x185mm (X/Y/Z).The DXF file is ideally 5mm aluminum, cut with a water-jet (a powerful laser would work too).The DXF file include an experimental mount for a second extruder, which limits the X movement to ~140mm. The STL files have to be printed out on a 3D printer.All files are published under GPLv2 or later.The STL files include original and derivative work from: http://www.thingiverse.com/thing:3069 http://www.thingiverse.com/thing:4835 http://www.thingiverse.com/thing:1794 http://www.thingiverse.com/thing:3462 http://www.thingiverse.com/thing:2151Build instructions are available in the wiki: http://wiki.shapercube.com/wagn/Shapercube_2_0_Manual