Presenting a simple tripod design. Choose between two styles of the tripod body. One builds with the 3 leg holes facing upward. The other is modifed with the leg holes facing downward. Two top styles are available, a simple small one, or a larger one with ribs underneath. Leg length, neck length can be whatever you want them to be. The top of the tripod can easily be redone to suit your needs, I thought of making a calculator stand, a connector for my webcam..... For the legs and neck I used wooden dowels. These could be printed easily also. This tripod is very strong, one day I might do a failure test to see how much weight it can tolerate.Cut wooden dowels (I used 1/4” diameter dowel), cut one end of each leg at 45 degrees so it will stand flat on a table. You will likely have to ream out the dowel holes to create a tight fit for all the pieces. See simple dimension drawing to review sizes.....